Ftroubleshooting - CombiSteel 7465.0020 Gebrauchsanweisung

THE APPLIANCE DOESN'T OPERATE
THE APPLIANCE IS NOISY
THE APPLIANCE STOPPED
WARNING
If Cutter Mixing is not done at suitable quality
If any function of security doesn't work  Do not use
the appliance.
*If these problems are still going on, contact with our authorized service.
F TROUBLESHOOTING
1. Check if the appliance is plugged in. Check the electrical
connections and voltage.
2.
3. Check the dividing tank's lid.
1. Check the blades. If the ducts on blade are not passed into the
shafts, blade may move and may damage the tank.
2.
Check that if there is material accumulated in the tank.
3. If the motor is noisy, stop it and call authorized service.
4. If hard materials are put into the dividing tank, stop the
appliance. Take off the hard materials.
1. The appliance can stop due to low voltage. In this situation check
the voltage.
If the appliance is overloaded, turn off the appliance and allow
2.
to cool down by taking off some materials from bowl.
In case of a change on voltage while operating ; appliance will give
warning by sound and stop operating. In this case please replug the
appliance.
6