Bahco BCL32SP1 Betriebsanleitung Seite 10

Attaching velcro backing sponge or sanding paper to the sanding pad
Press main switch trigger to activate.
Main Switch
Wrench
When operating the tool, if the spindle lock button is accidentally pressed which causes the
button stuck, use the wrench to rotate counterclockwise.
Sanding pad attachment is an alternative option, which is tightened to the shaft in clockwise
direction.
Screw Hole
Installing The Side Handle
Installing the side handle to the front
cover screw hole.
Side Handle
• 10 •