Machine Information; Safety Instructions - Ferm GGM1004 Originalbetriebsanleitung

ELECTRICAL GLUE GUN
GGM1004
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for many
years to come.
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents

1. Machine information

2. Safety instructions

3. Operation
4. Service & maintenance
1. Machine information
Technical specifications
Voltage
Frequency
Power input
Diameter glue stick
Weight
2. Safety instructions
Explanation of symbols
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates the presence of an electrical
voltage.
2
SPECIFIC SAFETY INSTRUCTIONS
Before operating the glue gun
Check the following points:
• Do the voltage of glue gun correspond to the
mains voltage.
• Are the mains lead and the mains plug in a
good condition: solid, without any loose ends
or damage.
• Mount the bracket before plugging in the tool.
• As hot glue can cause burns, avoid contact.
• Always allow the gun to cool down by itself.
• Never immerse the tool in water.
• Only use accessories that are recommended
by the manufacturer.
Immediately unplug the glue gun in case of:
• The glue gun is overheated.
• Malfunction of the mains plug, -socket or
damaged cables.
• Broken switch.
• Smoke or smell caused by scorched
insulation.
Electrical safety
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
220 - 240 V~
50 Hz
25W (75W max.)
11.2 mm
ca. 0.24 kg
Replacing cables or plugs
Immediately throw away old cables or plugs when
they have been replaced by new ones. It is
dangerous to insert the plug of a loose cable in the
wall outlet.
Using extension cables
Only use an approved extension cable suitable for
the power input of the machine. The minimum
conductor size is 1.5 mm
reel always unwind the reel completely.
Immediately unplug the plug from the
mains electricity in the case that the cord
gets damaged and during maintenance.
Always check that the power supply
corresponds to the voltage on the rating
plate.
Class ll machine. Your machine is double
insulated; therefore no earthwire is
required.
. When using a cable
2