Description - IBEA 45-Z Gebrauchsanweisung

31- Transport the brushcutter motor still with cover the di-
sco fitted
32- To avoid the risk of injury, stop the engine and blade
before removing material wrapped around the head or blade.
33- Always use a sharp blade, a dull blade is more likely to
snag and thrust. Replace a dull blade. DO NOT attempt to
sharpen.
1. Ignition switch (stop).
2. Throttle lock.
3. Throttle trigger.
4. Throttle advance (for cold engine start).
5. Transmission coupling.
6. Loop handle.
7. Safety bar.
8. Lock transmission lever.
34- Always stop engine and examine the blade after striking
any hard object.
35- In order to maintain performance and safety,be sure to
use original spare parts and accessories approved by the
manufacture.
36- When saw blade is used, fit the specific blad e guard.

3. DESCRIPTION

9. Safety blade guard.
10. Gear Box.
11.Grease cap for gear box
12. Transmission
13. Fuel tank.
14. Harness.
15. Fuel cap.
16. Air filter.
21
GB
ENGLISH
17. Starter grip.
18. Choke.
19. Flexible shaft
20. Head ACTIVE
21. Swivel
22. Decompressor (mod.55 65)