Herunterladen Inhalt Inhalt Diese Seite drucken

Power Supplies - nedis RDFM5010 Serie Anleitung

Retro bluetooth radio
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 8

POWER SUPPLIES

Battery operation
1. Open the battery compartment lid by pressing the two brackets at the same time.
Remove the lid and insert 6 batteries (C/UM-2). Please observe correct polarities when
inserting the batteries.
2. Close the battery compartment by pushing the two tabs of the lid into the corresponding
recesses and flap it towards the device until the brackets audibly snap in.
Important
If the device is operated exclusively with AC power or during non-use of more than one
month, please remove the batteries in order to avoid any damage by leaking batteries.
Replace the batteries if the volume of the device becomes lower or the sound becomes
distorted.
Battery safety precautions
Follow the battery manufacturer's safety, usage and disposal instructions.
Only use batteries of the same type and size.
Insert the batteries observing the polarity (+/–). Failure to properly align the battery
polarity can cause personal injury and/or property damage.
Do not mix battery types (e.g. alkaline, zinc/cartoon, rechargeable batteries) or exhausted
and new batteries.
To avoid fire and explosion do not recharge normal batteries. Keep batteries away from
children and pets.
We recommend the use of alkaline batteries for a longer lifetime of the batteries.
LOCATION OF CONTROLS AND FUNCTION
Top view
1. On/off switch and volume control
2. Telescopic antenna
3. Tone control
4. FM/AUX/AM Select button
5. Radio-Bluetooth® Select Switch
6. LED-Bluetooth® Indicator
7. Up button
8. Play/stop button
9. Down button
10. Earphone input
11. AUX-in input
12. AC socket for power cord
13. Battery compartment
14. Frequency dial and tuning knob
4
ENGLISH

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis