Front And Rear Panel - Edirol UM-1X Bedienungsanleitung

Front and Rear Panel

■ UM-1X
fig.UM-1X
1
■ UM-1SX
fig.UM-1SX_panel
1
1
USB Cable
Connect this cable to the USB connector of
your computer.
ADVANCED DRIVER (mode select)
2
switch
This switches the operating mode.
ON (Advanced mode):
FPT technology is used to allow high-speed
MIDI transfer.
Normally, you should use this mode.
* FPT → Fast Processing Technology of MIDI
Transmission
OFF (Standard Driver mode):
Use this if you are using the default MIDI
driver provided by your operating system.
3
MIDI IN Indicator
This will light when a MIDI message is
received.
2 3
7 6
2
3
7
6
4
6
4
5
4
5
MIDI IN Connector
(CONNECT TO MIDI OUT Connector)
Connect this to the MIDI OUT connector of
the keyboard or other devices that will
transmit MIDI messages to your computer.
MIDI OUT Connector
5
(CONNECT TO MIDI IN Connector)
Connect this to the MIDI IN connector of
the sound modules or other devices that
you wish to play from your computer.
MIDI OUT Indicator
This will light when a MIDI message is
transmitted.
7
USB Indicator
This indicator will light when the unit is
connected to your computer and is ready to
operate.
7