Windows Me/98 Users - Edirol UM-1X Bedienungsanleitung

■ Windows Me/98 Users

1
With the UM-1X disconnected, start up Windows.
Disconnect all USB cables other than those for a USB
keyboard or USB mouse.
2
Exit all currently running software (applications).
Also, close any open windows. If you are using a virus
checker or similar software, be sure to exit this as well.
3
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your
computer.
4
Click the Windows Start button. From the menu that
appears, select Run....
Open the Run... dialog box.
fig.05-13e_30
5
In the dialog box that
appears, input the
following into the
"Open" field, and click
[OK].
D:\Usb_me98\SETUPINF.EXE
* The drive name "D:" may be different depending on your system.
Type the name of your CD-ROM drive.
6
Open the SetupInf dialog box.
You are now ready to install the driver.
Getting Connected and Installing Drivers (Windows)
If the UM-1X is already
connected to your computer
and a message of "Add New
Hardware Wizard" is
displayed, go to the CD-ROM
folder named USB_me98,
open the file
README_E.HTM, and read
the "Troubleshooting"
section entitled "You
attempted to install using
the above procedure, but
were not able to."
Checking the drive name
Click the Start button, and
from the menu that appears,
choose My Computer. In
the window that appears,
note the drive name of the
CD-ROM drive in which
you inserted the CD-ROM
in step 3.
The (D:) or (E:) displayed by
the CD-ROM drive is
the drive name.
If a dialog box other than
"Ready to install the driver"
appears, follow the
instructions shown in the
dialog box.
17