Setting The Driver - Edirol UM-1X Bedienungsanleitung

Getting Connected and Installing Drivers (Macintosh)
■

Setting the Driver

1
Set the UM-1X's ADVANCED DRIVER switch to the
ON position.
* Installation cannot proceed as described below if the switch is
turned OFF.
2
Connect the USB cable of the UM-1X to your
computer.
3
Make MIDI device settings on your sequencer
software.
This completes installation of the driver.
24
To prevent malfunction and/
or damage to speakers or other
devices, always turn down the
volume, and turn off the
power on all devices before
making any connections.
For details on MIDI device
settings, refer to the owner's
manual for the software you
are using.
For information on the MIDI
equipment you connect to the
UM-1X, please contact the
manufacturer of your MIDI
equipment.