Reading Test Results On Your Synthetic Diamond; Screener - PRESIDIUM Synthetic Diamond Screener II Bedienungsanleitung

3. Reading Test Results with your
Synthetic Diamond Screener II
The SDS measures the UV absorption ability of the diamond and this
measurement is communicated as 'Natural' or 'Type IIa Diamond'.
After the "Start Test" button is pressed, the button will start to blink in
blue as testing is underway. Within 2 seconds, the Indicator light bar
will be lit. A lit blue bar will indicate the reading is 'Natural' and a lit red
bar will indicate 'Type IIa Diamond'. (Fig 3.1)
Fig.3.1 Results are to be read from the Indicator Lights
When the test is complete, the "Start Test" button will stop blinking and
be lit in white.
24