Pairing Sensors - Securifi Almond+ Kurzanleitung

This typically involves the following steps:
1) On the Almond+ LCD, inside the "Add sensor" section tap "Add".
2) Set the sensor/device in pairing mode as per its instructions.
Controlling Sensors and Almond+
Almond+ and the connected sensors can be controlled through a
variety of interfaces:
1) Almond iOS App
2) Almond Android App
3) Remote Web Interface: https://connect.securifi.com
4) Local Browser Interface: http://10.10.10.254 (default)
5) LCD UI.
Range Extender Location
Ideal location is 50-100 feet from
the main router epending on the
number of walls. Please also make
sure it is not so far from the main
router that it can't maintain a
stable connection with the main
router.

Pairing Sensors

5