IDEAL INDUSTRIES SignalTEK CT Bedienungsanleitung Seite 5

Cable socket
Used to connect
the units to the
cable to be tested
Ethernet LED
Indicates that
Ethernet is
connected
Activity LED
Indicates Ethernet
data activity
Autotest button
Press to start the Autotest
from the Test Unit end of the
Charging Indicator LED:
●
○ Charging complete
(Flashing) Not charging
Used to connect the
power supply / charger
(12vDC 2.5A)
Autotest button
Press to start the Autotest
from the Remote Unit end of
Battery status LED:
●
(Power ON) Battery level is
sufficient for use
●
(Power ON) Battery charge
level is low but still operational
○ Power OFF
156840.02
Test Unit
cable
Charging
DC Input
Remote Unit
the cable
USB socket
Used for uploading results and for
downloading user logo and software
updates
WiFi Adaptor
Connects to smartphone app
Display
Shows settings and results
Function buttons
Press to activate the function shown
in the screen area above the button
Escape button
Press to go back to the previous
screen without saving changes
ENTER button
Press to select the currently
highlighted screen function, or to
confirm changes
Cursor buttons
Press to change which screen
function or item is highlighted
Power button
Press to switch the Test Unit
ON/OFF
Rechargeable battery module
(Non-rechargeable backup battery
packs are also available)
Link LED
Indicates that the Remote Unit is
connected to the Test Unit
Pass/Fail LED
Flashes to indicate that a test is in progress.
When the test is complete,
indicates the result:
●
Test passed
●
Test failed
Saved LED
Indicates that the result has been
saved in the Test Unit
Power button
Press to switch the Remote Unit
ON/OFF
SignalTEK CT
En
4