IDEAL INDUSTRIES SignalTEK CT Bedienungsanleitung Seite 10

JOBS
Test results can be organised into folders called Jobs. A maximum of 5000 results can be stored, each
consisting of a Data Test result and a Wiremap Test result, divided into a maximum of 50 Jobs. Jobs can
be uploaded from the tester to a USB memory key and it is recommended to do this regularly to provide a
En
backup against loss of data.
Following a factory reset a default job "MyJob" is created. To change the name of the Job, press F1 (JOBS)
on the HOME screen then F1 (EDIT). The Job name and up to 8 Information fields can be edited by
selecting the required field with the cursor keys and pressing ENTER. Note that spaces are not allowed in
Job names, and any space that is entered will automatically be converted to an underscore character.
When all of the required details are complete, press F2 (APPLY). The details will be included when the Job
is uploaded to USB.
To create another Job, press F1 (JOBS) on the HOME screen then F2 (OPTIONS). Select NEW and press
ENTER. Fill in the new Job name. The Information fields are automatically copied from the last Job and can
be changed if required.
Select the Job that is to be used as the current Job by highlighting the Job Selection box on the HOME
screen using the cursor keys, pressing ENTER and selecting the required Job.
By selecting the Auto Save box on the HOME screen, the results can be set to save automatically,
manually, or only if the test is passed.
The first time a test is run with a new or empty Job, the result can be saved manually, even if Auto Save is
switched on. This allows the format of the result name to be adjusted and used for all subsequent results.
To adjust the result name, move the highlight to the Result field. The up/down cursor keys can then be
used to increase/decrease the result number or any other numerical part of the result name. Alternatively,
press ENTER to edit the result name. Subsequent tests will use the same result name format, but will
increment the result number, when the result is saved. For example, if the first result name is set to
"Cable0123", the next result will automatically be saved to "Cable0124" and so on.
To view saved results, press F1 (JOBS) on the HOME screen. The Job list is displayed. Use the cursor
keys to scroll up/down the list to the required Job, then ENTER to display the list of results in the selected
Job. Use the cursor keys to scroll up/down the list to the required result, then ENTER to display the
Wiremap and Data Test information for the currently selected result. Press F1 (RENAME) to edit the name
of the currently selected result. Press F2 (DELETE) to delete the currently selected result. Press F3 to
show ALL results, only PASS results or only FAIL results
If a cable needs to be re-tested, for example if it previously failed but has now been repaired, select the
result in the result list using the cursor keys. Press ENTER. then F1 (RETEST). This returns to the HOME
screen, runs a new test on the cable and automatically saves the result using the selected name,
overwriting the old result.
When a Job is complete, it can be uploaded from the tester to a USB memory key. Select the required Job
in the Job list then press F3 (TO USB). Select the required report style then press F1 (CONFIRM). Insert a
USB memory key and press ENTER. This does not remove the Job from the tester – the Job is only copied
to the USB key and more results can still be added to it later if required. Alternatively, all of the Jobs can be
uploaded at once by pressing F2 (OPTIONS) in the Job screen then selecting ALL TO USB in the Options
screen. This screen also allows all stored Jobs to be deleted.
9 SignalTEK CT 156840.02