Main Components - nor-varm 79654 Gebrauchsanweisung

CONVECTOR HEATER
Introduction
To get the most out of your new convector
heater, please read through these
instructions and the enclosed safety
instructions before use. Please also save
the instructions in case you need to refer to
them at a later date.
Technical data
GB
Max. output:
Gas type:
Dimensions:
3 heat settings
2 safety functions
Electronic ignition
For use with 11 kg gas bottle
Supplied with hoses and regulator

Main components

1. Ignition button
2. Heat setting selector
3. Cabinet
4. Heating element
5. Grille
6. Wheels
18
4.2 kW
butane
410 x 280 x 720 mm
5
Special safety directions
The gas system and regulator must be
checked for leaks using soapy water and if
necessary repaired before use (see 'Testing
for leaks').
Always ensure that hoses to and from
the gas bottle and any joints will not be
damaged during use.
Supply pressure must be 28-30 mbar.
Never use gas bottles or valves that are
damaged or rusty.
If you smell gas during use, close the gas
bottle regulator immediately. Open all
doors and windows, air the room out and
test for leaks as described in 'Testing for
leaks' .
1
2
3
4
6