Inhaltsverzeichnis
Werbung
before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
h) If the supply cord is damaged, it must be replaced by a special cord or assembly available from the
manufacturer or it's service agent.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
Description (Fig. A)
1 Drill depth limiter
2 Chuck
3 Switch for normal and percussion drilling
4 Side handle
5 Left/right switch
6 On/off switch
7 Switch lock
In this manual and/or on the machine the following symbols are used:
Read instructions carefully
In accordance with essential applicable safety standards of European directives
Denotes risk of personal injury, loss of life or damage to the tool in case of
nonobservance of the instructions in this manual.
Indicates electrical shock hazard.
Wear protective gloves
Wear a dust mask. Working with wood, metals and other materials may produce dust
that is harmful to health. Do not work with material containing asbestos!
Wear ear and eye protection
Faulty and/or discarded electrical or electronic apparatus have to be collected
at the appropriate recycling locations.
4
Safety instructions
Werbung
Inhaltsverzeichnis
