Werbung
Verfügbare Sprachen
Verfügbare Sprachen
MANUAL IL-MMED / IL-MMED3H
Read the installation instructions before use and keep them for future use.
Dimensions (mm)
Technical specifications
Info
Specs
Power Supply
220-240VAC, 50/60 Hz
Power/W
Max. 5w
Max. case temp.
70
Protection class
II
Mounting
1. Minimum ceiling space 130mm,
2. Hole 66-70mm diameter
minimum ceiling thickness 1-25mm
Info
Specs
Charging time
24 u
Operation
ACEM, maintained & non maintained
IP class
IP20
Emergency lighting
1 / 3h
duration
3. Pass the power cable through the
hole
4. Connect the power to the LED driver
A. Continuous or no continuous feed
jumper
cable
220-240VAC
Continuous power supply:
supply
Connect L, N and the jumper cable
Not continuous connection:
Connect L & N and remove the jumper cable
5. Connect the driver and the battery
6. Insert the battery and the driver
through the hole.
General information
• Always disconnect the power before you start the installation.
• If the luminaire no longer functions properly, it must be replaced in its entirety.
ATTENTION: This product may only be installed by a recognized installer.
B. ACEM
switch wire
switch wire
neutral
neutral
fase
fase
Connect L, N and remove the jumper cable and
connect SL and L with the toggle button.
7. Place the fixture in the hole
Werbung
