lockncharge pclocs EVO 40 Cart Bedienungsanleitung Seite 8

EVO 40 Cart™
STEP 4 - Routing the cables.
Insert the USB cables through the grommet
holes. Secure the cables in the 'S' clip (2 per clip).
STEP 5 - Connecting the power.
Ensure the iQ 16 Sync Charge Boxes are switched
on. Connect the external power cord to the Cart.
STEP 6 - Syncing devices.
(Follow the supplied instructions with the iQ 16 Sync Charge Box for the operation of syncing and charging).
Connect the host computer to the sync ports
outside the cart using the 3 host port cables.
STEP 7 - Gently close and lock the compartments.
Syncing or charging can proceed while the devices are connected and locked inside the compartments.
Pull through enough cable for your devices.
Plug the other end of the cable into a wall socket.
Neatly wrap the cord around the cable cleat
when it is not in use.