Firmware-Update - Neoline X-COP 8700s Kurzanleitung

User POI
If possible, you may send coordinates, photo and description of police camera, which is missed
in GPS base, to gpsbase@neoline.com
And after verification this POI will be added to global GPS base.
For detailed information please download the user manual from www.neoline.com
Firmware update
Update using an OTG Micro USB cable and flash cards:
ATTENTION! Supported USB memory are: FAT16 or FAT32
1. Download the latest firmware version at neoline.com/update (.efm, .voi and .db files)
2. Copy the downloaded files to the flash card
3. Connect the flash card to X-COP 8700s using the supplied USB OTG cable
4. Connect X-COP 8700s to a power supply of 12 to 24 V (e.g. to a cigarette lighter socket)
5. Turn on the radar detector
6. Firmware installation begins.
7. Once the installation is ready, X-COP 8700s turns on automatically.
11