Neoline X-COP 8700s Kurzanleitung Seite 10

X-Logic
You can make an accurate measurement of the acceleration of your car.
When the radar detector is on, hold ON/MENU and MODE for 1.5 seconds to enter the
X-LOGIC mode.
X-LOGIC mode only operates properly when there is X-COP 8700s–satellite connection.
When you turn on X-LOGIC, the following information will be displayed:
Speed
1/4 Mile
100 ~ 150 km/h
100 ~ 200 km/h
Speed Current speed
Once the car starts moving , the count begins from 0 to 99.9 seconds
Timer
When reaching a speed of 60 km/h, this block displays the time
60
(in seconds) spent to reach this speed.
When reaching a speed of 100 km/h, this block displays the time
100
(in seconds) spent to reach this speed.
When reaching a speed of 150 km/h, this block displays the time
150
(in seconds) spent to reach the 100 to 150 km/h speed.
When reaching a speed of 150 km/h, this block displays the time
200
(in seconds) spent to reach the 100 to 200 km/h speed.
When the car passes 402 meters, this block displays the time
402
(in seconds) spent to pass this distance.
• Once a speed of 200 km/h is reached or after 100 seconds of the measurement
(whichever comes first), the results are saved automatically, and the measurement ends.
• X-COP 8700s can save the 5 most recent speed measurements.
• The user can view the results of the measurements by pressing UP or DOWN.
• To delete the viewed speed measurement results, press ON/MENU.
Timer (0 ~ 100 Sec)
0 ~ 60 km/h
0 ~ 100 km/h
10