Specifications - Monacor PA ARM-88 Bedienungsanleitung

5.6 Editing presets
GB
1) Load the preset to be edited,
2) Deactivate the preset mode with the button PRE-
SET (5).
3) Modify the assignment of the outputs as desired,
chapter 5.1.
4) Delete the preset so that the memory location for
the modified preset will be free,
corresponding red LED will be extinguished.
5) Deactivate the preset mode with the button PRE-
SET (5) so that the red LEDs will indicate the mod-
ified assignment.
6) To memorize the modified assignment, reactivate
the preset mode with the button PRESET*, if re-
quired, select the memory location number with the
buttons CHANNEL SELECT (4) and memorize the
modifications with the button STORE (6).
*The preset mode must be deactivated and then reacti-
vated again, otherwise the modified preset will not be
memorized.

6 Specifications

Audio inputs
max. input level: . . . . . 7 V
impedance: . . . . . . . . . 30 kΩ bal.
connection: . . . . . . . . . XLR
Audio outputs
max. output level: . . . . 7 V
impedance: . . . . . . . . . 200 Ω bal.
connection: . . . . . . . . . XLR
Possible assignments of
the inputs and outputs: . . 2
Amplification: . . . . . . . . . 0 – 2-fold
S/ N ratio: . . . . . . . . . . . . 64 dB
Power supply: . . . . . . . . . 230 V~/ 50 Hz
Power consumption: . . . . 20 VA max.
Dimensions: . . . . . . . . . . 482 × 45 × 240 mm,
Weight: . . . . . . . . . . . . . . 2.6 kg
Subject to technical modification.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
10
chapter 5.5.
chapter 5.4. The
15 kΩ unbal.
100 Ω unbal.
64 ≈ 18.446 744 × 10 18
1 rack space
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
®