Cosatto oslo Bedienungsanleitung Seite 6

introduction
Your crib is suitable from birth until your child can sit upright.
The crib has a gentle sideways rocking motion that can be operated by disengaging the swing lock.
1 parts list
Contained in one box you should find
1. Crib ends x 2
2. Mattress base x 1
3. Crib Sides x 2
4. Cross bar x 1
5. Side bars x 2
6. Long screws x 16
please note: it is recommended that two people take part
in the assembly of this product.
2 assembling the crib
Join one of the crib ends (1) to the cross bar (4) by placing the barrel nut (7) into the hole provided in
the cross bar and attach through the crib end with a long screw (6) as shown, using the allen key.
Repeat this process attaching the other cot end to the cross bar. Attach each side bar (5) to the crib
ends by inserting the small wood dowel into the hole provided, at each end.
Swing the crib to one side and insert a barrel nut into the underside of the side bar (5) securing into
place with a long screw (as shown), with the allen key. Repeat this process until all four corners are
secure.
Screw the crib sides into position using the long
screws (6) and allen key, ensuring the mattress
blocks are facing inwards and towards the bottom ofthe crib. Place the mattress base (2) on top of
the four lips of wood.
3 fitting the swing lock
Place the key plate over the swing lock key.
Place the spring over the shaft of the swing lock key.
Insert the whole mechanism into the crib end (1)
Screw into place the key way plate, using screws (13) this should secure the swing key lock in position.
Ensure the swing lock and swing lock key is assembled and functions correctly before using the crib.
4 swinging the crib
To allow the crib to swing, rotate the swing lock key in either direction until the swing lock key
disengages.
The crib should now be able to swing.
5 locking the swing crib
To stop the crib from swinging push in fully the swing lock key and rotate the swing lock
key in either direction until the swing lock key engages into the locked position.
The crib should now be locked and the crib should not swing
7. Barrel nuts x 16
8. Allen key x 1
9. Swing lock x 1
10. Key way plate x 1
11. Middle Washer x 1
12. Spring x 1
13. lock swing key x 2