Specifications - Studio Banana Batband 1.0 Bedienungsanleitung

EN
Thank you for purchasing the BATBAND 1.0 Bluetooth
Wireless bone conduction hearable. This user manual is
designed to familiarize you with all the features of this
device. Please take the time to read this user manual
carefully, even if you are already familiar with a similar
product.
To ensure your safety and that of others, please read
the User Manual before using this device. Please do
not disassemble the product, it can be unsafe and will
invalidate the manufacturer's warranty.
ACCESSORIES
1. Micro-USB charging cable
2. User manual
OPERATIONS
Turn On/Off
Press the Power button for 1 second (On) or 5 seconds
(Off). Once turned On the LED Pilotlight will turn white.
Pairing
Enable Bluetooth in a connected device and make it
discoverable. While looking for a Bluetooth enabled
device BATBAND's LED Pilotlight will blink blue.
Select your BATBAND from the Bluetooth list in
your connected device (it will be identifiable by its
Bluetooth code). You may also pair your BATBAND to a
smartphone using the pairing interface in the BATBAND
App. If your device requires a password, enter "0000".
Once pairing is complete BATBAND's LED Pilotlight will
turn solid blue for a few seconds before showing white
to indicate it is On.
Pairing to Multiple devices
1. Connect the first device to your BATBAND, and turn
it off. Pair up the second device, then enable the first.
Now both devices are connected.
2. While both devices are connected, you can alternate
the selected source by pausing the one in playing
mode.
BATBAND will go into sleep mode after 10 minutes or
deep sleep mode after 30 minutes without connection
to any device.
Playback
To play music on your BATBAND simply play it on the
connected device and make sure it is correctly paired to
your BATBAND.
Making a call
To make a call simply dial the number on the connected
device and make sure it is correctly paired to your
BATBAND.
Charging
When the power is low, the LED Pilotlight blinks orange.
To charge, open the micro-USB port cover at the bottom
of your BATBAND. Connect it to a standard USB port
on your PC or a wall-charger using the micro-USB cable
provided.
While charging BATBAND's LED Pilotlight will blink
green. When charging is complete the LED Pilotlight
will show solid green.
Charging note
Your BATBAND should have sufficient power straight out of the
box to cover the Onboarding experience. It is recommended that
BATBAND be fully charged as soon as Onboarding is complete. In
the unlikely event of your BATBAND not having sufficient power
when unboxed it is recommended it be fully charged before
proceeding with the Onboarding experience. You must select a
qualified charger from a regular manufacturer.

SPECIFICATIONS

Bluetooth
BLE 4.1
Operating range 10 meters / 33 feet
Compatible Bluetooth profiles: HFP, HSP, A2DP, AVRCP
Battery
Double Li-ion rechargeable battery (2x 300mAh)
Intelligent auto standby function
Playback autonomy: 4.4 hours
Calling autonomy: 6.0 hours
Standby autonomy: 30 days
Full charging time: 1.5 hours
13