EN
THERMAL IMAGER
Touch screen
Beside keyboard and trigger, the thermal imager can be controlled via touch screen. To change
the settings or activate functions in the menu, tap on required part of the screen.
OPERATION
Battery charging
The device is powered by the built-in rechargeable Li-ion 2500 mAh battery.
Charge the battery before using the device for the first time:
1) Take miniUSB cable and insert the USB connector into power source.
2) Insert miniUSB connector into the power jack in the device.
3) Symbol
will remain on the display while charging. It takes 5-6 hours to fully charge
the battery.
4) As soon as the battery is fully charged, symbol
the device from the power source. The device is ready for use.
Switch on/off the device
Switch on: press and hold for 2 seconds
10
IR-CAM1 CONDTROL
User manual
will appear on the display. Disconnect
.
EN
THERMAL IMAGER
Switch off: press and hold for 2 seconds
Use buttons
,
to select POWER OFF and
pull the trigger.
Menu
Switch on the device. Short press
to enter menu.
Description of menu items is presented in the table below:
Symbol
Description
Display brightness
Date and time
Display backlight timer
Color temperature alarm
IR-CAM1 CONDTROL
User manual
.
11