Temperature Measurement; Battery Replacement - Eldom WB10 Bedienungsanleitung

TEMPERATURE MEASUREMENT

1. Use the following button
2. Use the button „UNIT" to select a unit: „
(Celsius) or „ F" (Fahrenheit)
3. During change of the unit the display shows
„----". The temperature will be displayed after
2 seconds.
Accuracy of measurement: +/- 3

BATTERY REPLACEMENT

CR2032 lithium baterry.
Necessity of the battery replacement is signalized on
the display by the message: „Lo".
1. Remove the battery chamber (1).
2. Pull the holder gently „A" and remove the battery
3. Insert a new battery under the holder „B" and
press it from the top. Pay attention to polarization.
4. Fix the chamber.
Used batteries should be thrown away the ontainers
specially designed for this purpose.
SAFETY INSTRUCTIONS
- Store the balance in a dry and shaded place.
- To clean the balance use a wet and soft cloth. Do not use
chemical agents. After cleaning the appliance must be left dry.
Do not merge the unit in water.
- When storing and shipping do not put other object on the
appliance.
- Improper operation of the balance may result from nearness of
appliances generating the electromagnetic field (such as
mobiles, microwave ovens, CB etc.).
- The unit must not be used by persons (including children) with
limited physical, sensory or mental capabilities, unless they are
supervised by a person responsible for their safety. Children
cannot play with the unit.
- The unit may be repaired by a manufacturer's authorized service
center only.
- All modifications or use of non-original spare parts or any other
elements is prohibited and makes use of the unit hazardous.
- The unit is made of materials which may be reused or re-cycled.
They must be provided to a relevant point which specializes in
collecting and recycling of electric and electronic appliances.
to switch the unit on
o C"
o C