USER'S MANUAL FOR
ELECTRONIC LUGGAGE SCALE WB10
B
GENERAL DESCRIPTION
1. Battery's cover
2. Catch
3. Hook
4. Belt
5. Luggage holder
ON/OFF switch
selection of weight
UNIT
and temperature units
Measurement of weight
1.Wrap the belt (4) around the luggage holder (5)
2. Catch the hook (3) on the catch (2).
3. Before lifting the luggage use the following
button
4. Use the button „UNIT" to select a unit:
„kg" (kilograms) or „lb" (pounds)
5. Lift the balance together with the luggage.
Keep it vertically and well-balanced.
6. Wait until the display blinks three times
(the measurement is ready).
7. The result will be displayed approximately
1 minute. Then the balance switches off
automatically
8. In order to carry out a new measurement,
before the balance switches off, one needs
to reset it by pressing the „Z/T" button.
9. In case no action is carried out, the appliance
switches off automatically after approximately
1 minute.
10. The balance may be switched off anytime
be pressing the „Z/T" button and holding
it 2 seconds.
A
to switch the unit on.
1
3
2
4
5