Asaklitt 31-1927 Bedienungsanleitung

Rear Rack Bike Light
Art.no 31-1927
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical
data. If you have any questions regarding technical problems please contact our customer services.
Safety
• Do not look directly into the light beam.
• Do not expose the product to extreme temperature or moisture.
Product description
• LED bulb for long life and low battery consumption.
• Mounts on rear luggage rack with 80 mm between bolts.
• Three light modes: constant, flashing and rolling wide angle.
Buttons and functions
• Press the beam selector once for constant beam mode.
• Press the beam selector once again for flashing beam mode.
• Press the beam selector once more for rolling wide angle mode.
• Pressing the selector a fourth time turns the light off.
Assembly
1. Remove the lamp housing using a coin
or flat-bladed tool.
2. Insert 2 × AA/LR6 batteries. Refer to
the markings in the battery compartment.
3. Mount the light onto the rear luggage rack
using the washers, nuts and bolts.
4. Replace the lamp housing.
Care and maintenance
Clean the product by wiping it with a soft, damp cloth.
Disposal
Follow local ordinances when disposing of this product.
If you are unsure how to proceed, contact your local authority.
Specifications
Batteries 2 × AA/LR6 (sold separately)
GREAT BRITAIN • customer service
tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
ENGLISH
Model