Asaklitt FF-240 Bedienungsanleitung

LED Rechargeable Front Bicycle Light
Art.no 31-5526
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical
data. If you have any questions regarding technical problems please contact our Customer Services.
Safety
• Do not look directly into the LED's light beam.
• Do not expose the product to high temperatures or extreme moisture.
• Recharge the product when the indicator light displays red.
• Never attempt to use the product while it is charging.
Product description
Energy efficient LED bike light with quick-release bracket. Steady or flashing beam modes.
Getting started
1. The product must be charged for 8 hours before using it for the first time.
2. Connect the included USB cable to a computer or similar device capable of charging.
3. If the battery is completely flat it will take at least 20 seconds for the charge indicator light
to come on.
4. Recharges take approximately 4 hours (except for the initial 8-hour charge mentioned above).
NOTE: Do not charge for more than 15 hours in a row.
Operating instructions
• Press the beam selector once for min beam mode.
• Press the beam selector twice for medium beam mode.
• Press the beam selector again for max beam mode.
• Press the beam selector once again for flashing beam mode.
• Pressing the selector a fifth time turns the light off.
Care and maintenance
Clean the product by wiping it with a soft, damp cloth.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
Specifications
Battery
Charging time
Burn time
GREAT BRITAIN • customer service
tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
Model FF-240
Lithium polymer, 3.7 V, 1,500 mAh
Approx. 4 hours
Approx 2½ hours on max beam
ENGLISH