CO/Tech B210S Bedienungsanleitung

Satellite and Data
Media Socket
Art.no 36-5578
Please read the entire instruction manual before using
the product and then save it for future reference.
We reserve the right for any errors in text or images and
any necessary changes made to technical data.
In the event of technical problems or other queries,
please contact our Customer Services.
Assembly
Connecting the network cable to
the terminal block of the media
socket
The 8-conductor network data cable consists of 8 wires
in 4 pairs (orange, green, blue and brown).
Each pair of wires consists of a solid coloured wire and
a wire of the same colour with white stripes on it.
Remove the cover plate of the terminal block.
Strip the cable and make sure that the wires are
the same length. Follow the colour guide on the B
row of the cover plate.
Left to right:
• Blue
• White/blue
• Orange
• Orange/white
• Green
• Green/white
• Brown
• Brown/white
GREAT BRITAIN • CUSTOMER SERVICE contact number 0845 300 9799
e-mail customerservice@clasohlson.co.uk internet www.clasohlson.com/uk
Model B210S
Insert the ends of the wires into
the terminal block, you do not
need to strip them. Make sure
that the wires are inserted all
the way into their respective
tracks.
Replace the cover plate and
push it down completely. Push
down hard, it might be difficult.
The cover plate presses
the wires down onto a knife
edge which cuts through their
insulation.
Press the terminal block
into the media socket until
it clicks into place.
Connect the cable from
your satellite dish to
the F-connector on
the media socket.
Disposal
This product should be disposed of in accordance with
local regulations. If you are unsure how to proceed,
contact your local council.