Uk User Manual - SBS TESPEAKERBT930W Bedienungsanleitung

UK
USER'S GUIDE
1. Hidden Led For Status (ON/OFF, Bt Mode).
2. Mini Jack In 3.5mm.
3. MicroUSB In For Charge.
4. ON/OFFf&Pairing Button.
5. Speakers.
GETTING STARTED
Before use, the speakers must be charged. Please connect the supplied
MicroUSB-USB cable from the speakers plug (3) to a computer USB port, or
use an AC charger 5V/1A. A red LED will turn on.
PAIR AND CONNECT USING BLUETOOTH
The following instructions apply for a mobile or smart phone but the procedure
is the same for others BT devices such mp3 player or music players. To pair
the speakers to your device, first you must to pair the speakers between
themselves.
1. On both speakers push and hold the ON/OFF button (4)
2. After about 3sec a message will inform that the speakers are turned
ON STILL HOLD.
3. After about others 2sec a message will inform you that the speakers
are in pairing mode = a blue led will turn on. You can stop to hold the buttons.
4. Wait 5-6 seconds: another message from both speakers will inform
you that they are connected.
5. Now you can turn on the Bluetooth research on your smartphone and
look for the code MNS.
6. Choose on the found devices list MSN and you will associate the
device to the speakers.
7. Now you can enjoy your music.
CONNECT BY USING A CABLE
You can also connect the speakers to a compatible device by using an 3.5mm
mini jack wire. In this case the music will be listen just in one speaker.
CONTROLS
The speakers have just the on/off control: all others controls (such volume
+/- or previous/next song) must be done by the smartphone.
WARNINGS
• Listen to music at a moderate level. Continuous exposure to high volume
may damage your hearing.
• Keep device dry. Precipitation, humidity and all kind of liquids can contain
minerals that will corrode electronic circuits.
• Do not store in hot areas. High temperatures can shorten the life of speakers.
• Do not store in cold areas. When the device return to its normal temperature,
moisture can form inside and damage electronic circuits boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean
the device.
4
WIRELESS TECHNOLOGY
®