Evolution Amber 40 Bedienungsanleitung Seite 8

Green footswitch mode – four presets
The footswitch push-buttons features:
P1
switch-on
the preset P1
The mode allows to save and recall the four presets. Each preset comprises:
- the chosen amp's channel and its MODE,
- the status of the FX LOOP,
- the power/volume LEVEL
To set and save the preset:
1. Press footswitch button to select preset P1 to P4
2. Use channel MODE switch to select channel and its mode
3. Use LEVEL switch to select power/volume level
4. Set FX LOOP status by front panel FX LOOP switch (upwards)
5. Use STORE switch (downwards) to save preset. Short flashing confirms saving.
Yellow footswitch mode – six presets
The footswitch push-buttons features:
P1/4
switch-on the
preset P1 or P4
The mode allows to save and recall the six presets. Lit SHIFT UP indicator means P4 to P6
presets range. SHIFT UP button way of working is optional and is described in Footswitch mode
.
setting section
Magenta footswitch mode – four banks of four presets
The footswitch push-buttons features:
P1
switch-on
the preset P1
bank B1
The mode allows to save and recall the four presets in each of four banks. Pressing and holding
selected bank button for more than one second switches to the selected bank. Short flashing of
indicator confirms bank switching. Presets saving and recalling is identical to GREEN footswitch
mode.
P2
switch-on
the preset P2
P2/5
switch-on the
preset P2 or P5
P2
switch-on
the preset P2
press and hold the button for more than one second
bank B2
P3
switch-on
the preset P3
P3/6
switch-on the
preset P3 or P6
P3
switch-on
the preset P3
bank B3
-8-
P4
switch-on
the preset P4
SHIFT UP
presets range
shift
P4
switch-on
the preset P4
bank B4