Vitek VT-3528 BK Die Betriebsanweisung Seite 6

ENGLISH
button (10) to set Sleep time (time of switching
off). Press button «SNOOZE/SLEEP» (10) to
change sleep time duration from 90 min down
to 10 min.
Display show sleep time duration (blinking).
Display show under sleep mode (Radio is ON).
DST – Daylight Saving Time mode setting.
Press button «
toggle on and off DST function.
7. Thermometer function
Remark:
Temperature Range for Indoor: 0 to + 50°С or
32 до 122°F.
Radio operation
- Press the Power ON/OFF button (9) to enter
Radio mode.
- Select AM or FM band using the wave band
switch (15).
- Select the station using the tuning control
«TUNING» (16)
- Adjust the volume level using volume
control (14).
- Press the Power ON/OFF button (9) to turn
radio off.
Note:
- The AM band uses the internal directional
aerial. Rotate the radio for the best
reception.
- To get the best reception in FM band
change the location of antenna (20).
3528IM.indd 6 3528IM.indd 6
» (7) and hold for 3 sec to
Display show turn DST icon On.
RESET
- The reset button «RESET» (17) is located
on the back of the unit. Use it to rollback the
settings, in case of malfunction or changing
the batteries (to press it use a ballpoint pen or
similar object). This will return all the settings
to the default values. All the stored data (time,
alarms) will be lost.
Caution:
- No naked flame sources, such as
lighted candles, should be placed on the
appliance.
- Do not place the unit in the closed
bookcase or racks without proper
ventilation.
- To prevent fire or shock hazard, do not
expose to rain or any type of moisture.
- The unit should not be exposed to direct
sunlight, very high or low temperature,
moisture, vibrations or placed in a dusty
environment.
- Do not use abrasive, benzene, thinner or
other solvents to clean the surfaces of the
unit. To clean, wipe it with mild non-abrasive
detergent solution and clean with soft cloth.
- Never attempt to insert wires, pins or other
such objects into the vents or openings of
the unit.
- Do not place the unit under the direct light
(of a table lamp, for example). The bright
light would affect the reception of the
infrared sensor function.
Warning: To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture.
Note: Do not connect FM antenna to outside
antenna.
Dripping warning: Prevent the appliance from
rain or other liquids drops.
Infrared sensor function
1. In radio Off mode, infrared display alarm 1
and alarm 2 time.
Keep the hand above the top of sensor (6)
for some time to show the alarm 1 time.
6
24.11.2006 15:25:03 24.11.2006 15:25:03