Sleep Function - Vitek VT-3528 BK Die Betriebsanweisung

Display show DOW (day of the week) setting
Display show DOW (day of the week) setting
Display show DOW (day of the week) setting
2. Setting alarm output and alarm ON/OFF.
А. Changing alarm output
Press «Al 1» (3)/«Al 2» (4) buttons in turn to
select wake up by Buzzer or Radio (adequate
label will be displayed).
Press button «Al 1» (3) or «Al 2» (4) trice to
switch off the alarms.
Display show Alarm 1 wake up by Buzzer
Display show Alarm 1 wake up by Radio
Display show Alarm 2 wake up by Buzzer
3528IM.indd 5 3528IM.indd 5
Display show minute setting mode.
mode (Mon to Fri).
mode (Mon to Sun).
mode (Mon to Sat).
Display show Alarm 2 wake up by Radio
B. Buzzer pattern
1st 8 second output 1 beep, 2st 8 second out-
put 2 beep, 3rd 8 second output 4 beep, after
that continue output beep tone. The same pat-
tern repeat at the next minute again.
3. Alarm duration and snooze function
Alarm signals (buzzer or radio) will continue for
30 minutes if no key is pressed, then will stop
automatically and wait for the same alarm time
on the next day.
Snooze function:
- During alarming press « SNOOZE» button
(10) to enable snooze function. Buzzer
alarm or Radio alarm will be stopped.
- Snooze interval is 9 minutes.
- Snooze will continue unless the Power
ON/OFF (Alarm Off) button is pressed or
alarm signal is stopped automatically after
30 minutes.
4. Changing display content
Press button (8) to display current year,
after 5 sec display will return to the normal
mode.
5. Changing display content
Press button (7) to display current day
and month, after 5 sec display will return to the
normal mode.

6. Sleep function

During radio mode press «SNOOZE/SLEEP»
5
ENGLISH
24.11.2006 15:25:03 24.11.2006 15:25:03