Specifications - Enerpac JHA-Serie Bedienungsanleitung

SAFETY INFORMATION
(continued)

SPECIFICATIONS

WARNING
The load must be evenly distributed over the entire jacking pad of the toe
lift attachment. The plunger must be in exact line with the movement of the
load. When using multiple units to lift a load, all jacks must be operated at
the same time, so that the load is lifted evenly. Failure to lift the load
evenly could cause it to slip off the jacking pad.
WARNING
DO NOT lift a load which exceeds the
capacity of the jack. The load rating is
marked on the jack nameplate.
WARNING
If the jack is subjected to abnormal or shock loads, it should be inspected
immediately by a qualified hydraulic technician.
Model Style Capacity
No.
JHA-73 Standard 7
Solid
JHA-156 15
Plunger
JHA-356 35
Aluminum
JHA756 75
JHA-1506 150
JTA-76 Toe Lift 7
Aluminum
JTA-176 17
JTA-356 35
Stroke
Tons in (cm)
3.0 (7.62)
6.06 (15.39)
6.13 (15.57)
6.06 (15.39)
6.13 (15.57)
6.06 (15.39)
6.13 (15.57)
6.06 (15.39)
3
Effective Area Collapsed Height
2 2
in (cm ) in (cm)
1.49 (9.61) 5.25 (13.33)
3.14 (20.26) 9.75 (24.77)
7.07 (45.62) 10.13 (25.73)
15.90 (102.59) 11.25 (28.59)
30.68 (197.95) 12.88 (32.72)
3.14 (20.26) 12.56 (31.90)
7.07 (45.26) 14.19 (36.04)
15.90 (102.59) 16.63 (42.24)