DeVilbiss DV6EB Bedienungsanleitung Seite 4

IMPORTANT PARTS OF YOUR DV6EB EXTERNAL BATTERY
The DV6EB External Battery consists of 1 or 2 Battery Packs placed inside the Battery Charging Base.
DV6EB External Battery Package Contents
• Battery Charging Base (x1)
• Lithium Ion Battery Pack (DV6EB-613) (x1)
• 120 Watt Power Supply (x1) (DV68-620)
• Instruction Guide (x1)
Battery Charging Base (Fig. 1)
1. Power Input
2. Interface/Information Panel (see Figure 3)
3. Access Cover screw
4. Access Cover
5. Battery Pack Compartment (under Access Cover)
6. Power Cord to CPAP
7. Power Cord Retention Clip for power supply cord
8. 120 Watt Power Supply (DV68-620). NOTE – Use the AC power cord that came with your CPAP.
2
1
Fig. 1
7
6
Clip Release
Battery Pack (Fig 2)
1. Charge Status Gauge
2. Battery Connection Terminals
3. Charge Status Button
EN - 4
3
4
5
5
7
Fig. 2
Interface/Information Panel (Fig. 3)
1.
• Each LED = 25% of total charge capacity.
NOTE – LED 1 Blinking during use = low battery alert, battery <10%
charged.
2.
Fuel Gauge LEDs.
3.
• OFF: Not charging.
• Green – Solid: Batteries fully charged.
• Green – Blinking: Batteries are charging.
4.
• OFF: External Battery is not connected to power source.
• Green – Solid: Connected to power source.
5.
• OFF: No error conditions present.
• Red – Solid: Wrong power supply connected to charger base, no
• Red – Blinking: Failure of the External Battery charging base,
8
1
2
3
Battery Fuel Gauge (Left & Right)
Check Status Button – Press button for activation of Battery
Charging Status LED:
External Power Indicator:
Error indicator:
power is provided to the CPAP.
disconnect from CPAP and from power source and discontinue
use.
1
4 5
3
Fig. 3
2
A-DV6EB-1