Somogyi Elektronic home FKK09 Bedienungsanleitung Seite 4

Caution: Risk of electric shock! Do not attempt to disassemble or modify the unit or its
accessories. In case any part is damaged, immediately power off the unit and seek the assistance of
a specialist.
In the event that the power cable should become damaged, it should only be replaced by the
manufacturer, its service facility or similarly qualified personnel.
Meaning of symbol on appliance: Do not cover!
Covering the unit can cause overheating, fire or electric shock!
FEATURES
free standing electric, design fireplace, with built-in fan heater for heating the atmosphere of indoor premises • white MDF board • stainless fireplace • built-in LED light source • independently
useable realistic glowing coal and flame-effect • 1000 W / 2000 W heating power • overheating protection
STRUCTURE (Figure 1)
1. cold air inlets • 2. heated air outlet grill • 3. glowing coal effect • 4. flame effect • 5. main switch • 6. heating stage switches (2 x 1000 W) • 7. plastic feet • 8. power cable
INSTALLATION
1. Before switching on for the first time, carefully remove the packaging material taking care not to damage the appliance and power cable. Do not use the product if it is damaged in any way!
2. The unit may only be used indoors in dry conditions!
3. Set the appliance on a stable and horizontal surface. The free circulation of warm air must be ensured for proper operation, therefore, please note the minimum installation distances
indicated in Figure 2. Make sure that no foreign objects cover the cold air inlets on the rear of the appliance.
4. Do not locate the appliance directly below a wall outlet!
5. Switches of the unit has to be in OFF position!
6. Plug the unit into a standard grounded wall socket. Now the unit is ready for operation.
OPERATION
The unit can be operated using the rocker switches located on the front left side of the appliance.
The unit may emit a slight odour when turned on initially, which is not a malfunction. It is harmless and evaporates quickly
You can power on the appliance with the main switch (5), and flame-effect can be switched on with it as well. So the light-effect can be activated separately, without the heating stages.
Thereafter the fan-operated heating stages I (1000 W) and I+II (2000 W) can be activated by the switches.
The switch II can not switch on anything itself, it works only together with switch I.
All function can be turned off with the main switch.
In the event of overheating, the overheating protection function will switch off the unit, for example when the air inlets and outlets are covered. Power off the unit by unplugging it from the electric
outlet. Allow the appliance to cool (for at least 30 minutes). Check whether the air inlets and outlets are obstructed or not, and clean them if necessary. Switch on the unit again. If the overheating
protection activates again, power off the unit by unplugging it from the electric outlet and contact the service facility!
CLEANING AND MAINTENANCE
In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the manner of use and degree of contamination.
1. Switch off and power off the unit by unplugging it from the electric outlet before cleaning!
2. Let he appliance to cool (for at least 30 minutes).
3. Use a vacuum cleaner to clean the air inlets (1) and outlets (2)!
4. Use a slightly moistened cloth to clean the unit's outer surface. Do not use aggressive cleaners. Avoid getting water inside onto the electric components of the appliance!
TROUBLESHOOTING
Malfunction
The unit is not in operation.
The unit doesn't heat.
Flame-effect doesn't work.
Overheating protection activates frequently.
Waste equipment must not be collected separately or disposed of with household waste because it may contain components hazardous to the environment or health. Used or
waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility
specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the
local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs
arising.
SPECIFICATIONS
power supply:. . . . . . . . . . 230 V~ / 50 Hz
heating power [ ]:. . . 1000 / 2000 W
light source [ ]: . . . . . . . . LED, 5 W, not replaceable
maximum power: . . . . . . . 2005 W
IP protection: . . . . . . . . . . IP20: Do not protected from ingress of water!
size of heater: . . . . . . . . . 77 x 72,5 x (25/17,5) cm
weight: . . . . . . . . . . . . . . . 15 kg
length of power cable (within/outside furniture): 1,75 m (1 m + 0,75 m)
noise level:. . . . . . . . . . . . 50 dB(A)
Solution
Check the power supply.
Check the power supply.
Check the position of the switches.
Check the information listed at section of overheating.
Check the power supply.
LED flame-effect may have broken, contact the service.
Clean the appliance.