User Interface - Siemens FUE950 Kurzanleitung

2. Install protection cover.
WARNING
Never connect between two phases as this will destroy the mains unit.

User interface

Display
The display will always be configured in accordance with the customer's application and selected settings and consequently
there will be more or fewer display options under the individual display menus.
SITRANS FUE950 display
Button for operation
A push button ( ) mounted on the front of the meter is used to switch to the various displays. The button can be pressed
briefly (< 3 sec.) or long (> 3 sec.). The actual menu loop number is indicated in the left side of display.
● Pressing the button
number is reached, the display shows the first display menu in the loop again.
● Pressing the button for
Permanent
● pressing of the
reached. Then the display shows the first menu loop again.
6
Display indication
①
Values for energy, power, volume, flow rate, error, and date
②
Frame of least significant digits/decimal places
③
Energy and flow units
④
Temperature unit
⑤
Flow pulse input indicator point
⑥
Maximum power/flow
⑦
Menu loop number
⑧
Tariff 1 and 2
⑨
Alarm symbol
briefly
: The display switches to the next display menu within a loop. When the maximum menu
long
: The display switches to the next menu loop for reading the secondary parameters.
button: The display switches to the next menu loop until the maximum loop number (6) is
FUE950 Energy calculator
A5E03652942-002, 04/2014