Herunterladen Diese Seite drucken

ABB CP-ASI serie Betriebs- Und Montageanleitung Seite 12

Dc/dc-wandler für as-interface
Vorschau ausblenden Andere Handbücher für CP-ASI serie:

Werbung

Type
Electrical connection
Wire size
Stripping length
Tightening torque
Environmental data
Ambient temperature ranges
Vibration
Shock, half-sine (IEC/EN 60068-2-27)
Isolation data
Rated insulation voltage U
i
(IEC/EN 60950-1, EN 50178)
Rated impulse withstand voltage U
(EN 50178)
Power frequency withstand voltage test (test
voltage)
(routine test / type test)
Pollution degree (IEC/EN 60950-1)
Overvoltage category
fine-strand with wire end ferrule
fine-strand w/o wire end ferrule
operation
rated load
storage
sinusoidal (IEC/EN 60068-2-6)
input/output
input/ground
output/ground
shield/output
shield/ground
input/output
imp
input/ground
output/ground
input/output
input/ground
output/ground
input
output
rigid
-25...+70 °C (-13...+158 °F)
-25...+60 °C (-13...+140 °F)
-40...+85 °C C (-40...+185 °F)
2-17.8 Hz, amplitude ± 1.6 mm
II (IEC/EN 60950-1); III (EN 50178)
II (IEC/EN 60950-1, EN 50178)
CP-ASI/4.0 DC/DC
2
0.5-4 mm
(20-12 AWG)
2
0.5-4 mm
(20-12 AWG)
2
0.5-6 mm
(20-10 AWG)
7 mm (0.28 in)
0.8 Nm (7.08 lb.in)
17.8 Hz - 500 Hz, 2 g
30 g (6 ms), 20 g (11 ms)
50 V
50 V
50 V
50 V
50 V
1.5 kV; 1.2/50 s
0.8 kV; 1.2/50 s
0.5 kV; 1.2/50 s
1.5 kV AC / 1.5 kV AC
1.5 kV AC / 1.5 kV AC
500 V AC / 500 V AC
2
12

Werbung

loading

Diese Anleitung auch für:

Cp-asi/4.0 dc/dc