Herunterladen Diese Seite drucken

ABB CP-ASI serie Betriebs- Und Montageanleitung Seite 11

Dc/dc-wandler für as-interface
Vorschau ausblenden Andere Handbücher für CP-ASI serie:

Werbung

Technical data
o
Data at T a = 25
C, U in = 24 V DC and rated values, unless otherwise indicated
Type
Input circuit
Rated input voltage U
in
Input voltage range
Allowed voltage between input and earth
Allowed input ripple voltage
Continuous input voltage with no damage to DC/DC converter
Turn-on voltage
Shut-down voltage
Typ. input current
Typ. power consumption
²
Inrush current limiting / I
t (cold start)
Power failure buffering time
Transient overvoltage protection
Reverse input polarity protection
Internal input fuse
Output circuit
Rated output power
Rated output voltage
Tolerance of the output voltage
Rated output current I
r
Derating
Control time
Starting time after applying supply voltage
Rise time
Residual ripple
Switching peaks
Output circuit - No-load, overload and short-circuit behaviour
Characteristic curve of output
Short-circuit protection
Short-circuit behaviour
Current limiting at short circuit
Overload protection
No-load protection
Overtemperature protection
General data
Power dissipation
Efficiency
Duty time
Weight
Material of housing
Mounting
Mounting position
Minimum distance to other units
Degree of protection
Protection class
at T a < 60 °C
60 °C < T a < 70 °C
at rated load
with 5 mF
BW = 500 kHz
BW = 20 Hz - 20 MHz
min/max
net
horizontal/vertical
housing/terminals
CP-ASI/4.0 DC/DC
24 V DC
18.0-32.4 V DC
max. 60 V DC / 42.4 V AC
max. 5 V
, 47 Hz - 40 kHz
pp
max. 36 V DC
typ. 17.5 V DC
typ. 14.0 V DC / 35 V DC
5.6 A
132 W
< 1.8 A /
max. 0.5 ms
varistor
included, unit does not start at reversed polarity
10 A slow-acting
122 W
30.5 V DC
± 3 %
4.0 A
2.5 % per Kelvin temperature increase
< 2 ms
max. 1 s (typ. 650 ms)
typ. 100 ms
typ. 200 ms
typ. < 50 mV
typ. < 100 mV
U/I characteristic curve
continuous short-circuit stability
continuation with output power limiting
5.0 A / 9.0 A
output power limiting
continuous no-load stability
yes, automatic recovery after temperature went down
typ. < 12.7 W (24 V DC, 4.0 A)
typ. 90.5 %
100 %
0.488 kg (1.076 lb)
metal
DIN rail (IEC/EN 60715), snap-on mounting without any tool
horizontal
15 mm (0.59 in) / 25 mm (0.99 in)
+, -
1.0 A²/s
+, -
pp
pp
IP20
I
11

Werbung

loading

Diese Anleitung auch für:

Cp-asi/4.0 dc/dc