Operation - pbq 12V/20A LiFePO4 Bedienungsanleitung

4. Operation

The power supply/battery charger operates automatically. The operation mode can be read
from the LED indications.
LED indication overview:
Orange LED Green LED
Off Off
On Off
Off On
Blinking Blinking
User tips:
- Prevent deep discharging of the batteries. The battery life will be reduced significantly.
Charge a deep discharged battery as soon as possible.
- Let the battery charger finish the charge cycle completely.
- If the battery is not charged for a longer period, for example during winter, connect the
battery charger to the mains once every month to recharge the battery. Battery self-
discharge and the quiescent current of the connected users will drain the battery charge
slowly.
- Do not charge the batteries below 0°C. Move the battery to a warmer place and start
the charge.
- If the charger has been disconnected from the mains, disconnect the charger also from
the battery to prevent slow discharge of the battery by the charger.
- Keep the ventilation openings clean and free of accumulated dust. Blow away the dust
and clean the battery charger enclosure eventually with a cloth slightly moistened.
Description:
Battery charger not connected to the mains.
.
The battery is charging
1. The battery is full.
2. There isn't a battery. The charger functions as a power supply
A problem occurred.
See chapter "Problem solving"
17
English