Maestro MR900 Bedienungsanleitung Seite 6

Test the blade operation by rotating it will your hand. There should be no friction with the
grill lock nut.
Mount the front grill (1) to the rear grill (3) by using the position fixer provided at the grill
rim. Clamp together with the lateral clips provided.
Control and positioning
Fan speed control:
Make sure that the switch is set to "0" position, connect the plug of the core to the electric
socket.
To operate the fan, press one of the buttons on the control panel:
Position «0» – «OFF»
Position «1» – «LOW» speed
Position «2» – «MEDIUM» speed
Position «3» – «HIGH» speed
Press the "0" button to turn the device off.
Switching on the "swinging" regime
Press button (4) "swinging" to turn the device on in the swinging regime. Pull the button (4)
up to switch this regime off.
Regulating of the fan case bending
To regulate the fan case bending relative the leg release the adjustment screw by turning
it counter clockwise, place the fan case in the desired position and tighten the adjustment
screw.
Maintenance and care
WARNING!
Before cleaning the appliance in any way, make sure that the appliance plug is not
connected to the socket.
Before cleaning turn off the fan and wait till the blades completely stop.
Never place it in water or any other liquid.
Do not use harsh abrasives, caustic cleaners or oven cleaners when cleaning this
appliance.
If the fan is not very dirty, it is sufficient to wipe its parts with a wet napkin. Protective grid
can be cleaned with a vacuum cleaner and a soft brush.
If the blades are very dirty, frontal grid can be removed and blades washed in warm water
with soft detergent. Do it as follows:
6