Operation; Turning On The Power - Siemens SISTORE AX4 Lite 250/100 V2.0 Installationsanleitung

7

Operation

7.1

Turning on the power

Siemens Building Technologies
Fire Safety & Security Products
Step 2:
Video Out: Connect a monitor to a composite video output for multi-screen display
and playback. A VGA connector is provided so that you can use a standard, multi-
sync computer monitor as your main monitor.
Step 3:
Power connector: Apply power to the unit.
The SISTORE AX4 Lite is operational in approximately 60 seconds after the power
cable is connected to the system. The SISTORE AX4 Lite may be powered down by
selecting Shutdown from the System Menu. When shutting down the DVR, you
need to confirm that you want to shut down the unit. No on/off switch is provided.
Fig. 2 Front panel
Power LED
USB connector
Panic button
Enter/Pause button
Display modes
Press the desired camera number button to view the desired camera image, and
press the camera button again to change the displays format to the quad (2x2)
mode.
Recording
Once you have installed the system following the instructions described in the
User's Manual, it is ready to record. There is no recording button on the front panel
to initiate recording video. The SISTORE AX4 Lite will start recording video
according to the schedule configured by the user and from external and internal
events such as alarm input, motion detection or text-in events.
HDD LED
Camera buttons
PTZ/Zoom button
Arrow buttons
Operation
Alarm Out LED
Play/Clip button
Menu button
11
EN
01.2009