lockncharge iQ 10 Bedienungsanleitung Seite 5

Sync and Charge Instructions
Replace the thumb screws to lock the power
compartment lid.
Close the doors and use a padlock to secure the iQ
10 Sync Charge Station.
Plug the iQ 10 Sync Charge Station power cable
into the unit, then into the wall socket. Charging
will commence automatically (may need to switch
the wall outlet "on").
INSTRUCTION MANUAL
Charge Only Instructions
Neatly bundle the excess device cables inside the
power compartment area.
After connecting all the cables, replace the
retaining bracket over the USB Power Supply's.
NOTE: the USB ports should be facing down and
into the rubber grip cable holder.
Replace the power compartment lid by sliding it
back into position and pressing down to close lid.