AGPtek STC01W Bedienungsanleitung Seite 5

setting interface.
2)Press button SET to cycle【CLOCK( )-Off-On】.
3)Select icon and press OK to enter.
4)Press button / until the desired time is
displayed.
5)Press button OK to cycle from Minute, Hour, Day of
the Week.
6)Press button OK to return, then wait for 5 seconds
to save changes and back to Home automatically.
V. Set Power On/Off Timer:
1)Hold button SET for 3 seconds.
2)Press button SET again.
3)Use button SET to switch between ON or OFF.
Choose ON, to enable power-on timer, the Control
Socket will turn on when reaches the time you set in
step 4. Choose OFF, to enable power-off timer, the
Control Socket will turn on when reaches the time
you set in step 4.
4)Press button / until the desired time is
displayed.
5)Press button OK or wait for 5 seconds to
automatically back to Home.
1.Cancel Power On Timer
1)Hold button SET for 3 seconds.
2)Press button SET to switch and choose ON.
3