Werbung
Verfügbare Sprachen
Verfügbare Sprachen
88: Only for display
88: Only for
0
00: Restore Factory
display
Defaults
Note for A2: The higher the setpoint of A2, the more
power saving. If you set the temperature to 25℃and
the A2 to 2℃, then in cooling mode, the socket will
be energized when the ambient temperature is
higher than 27℃ and power off when is lower than
23 ℃ . In heating mode, the socket will power off
when the ambient temperature is higher than 27 ℃
and be energized when is lower than 23℃.
IX. Cooling / Heating Mode ( 8)
Cooling / Heating Mode Setup
1. Select
8 under Advanced Settings, see Section
VIII>Symbol> 8.
2. Press button
/
to switch between
00 (Cooling Mode) and 01(Heating Mode).
3. Wait for 5 seconds to save changes and back to
Home automatically.
Cooling Mode(00)
Heating Mode(01)
For cooling devices, please use under Cooling Mode.
When room temperature is lower than the Set-point
in Cooling Mode, the Control Socket will switch OFF.
For heating devices, please use under Heating
8
Werbung
