PEUGEOT EnergyGrind-150TA Bedienungsanleitung Seite 26

BEFORE INITIAL STARTING UP
1. Secure the grinder to a work bench as shown (fastening screws not supplied).
2. Remove the flanges from the dry grinding wheel or wheels.
3. Use an open-ended spanner (not supplied).
4. Take the wheels off their spindles as shown in Fig.5.
1. Movable 15W lighting
2. Voltage drop switch
3. Holes for fixing onto work bench (x2)
4. Grinder rotation locking bolt
5. Eye shield
6. Eye shield support
7. Ø 150 mm dry grinding wheel
8. Adjustable tool rest
9. Brass wire wheel brush
10. Wet grinding wheel
11. Wet grinding wheel tank
12. Tank drain
13. Adjustable water tank support
14. Wheel dressing tool with support
3
5
26
4
6