Setting The Day Of The Week; Using The Pedometer - Auriol H14347 Bedienungs- Und Sicherheitshinweise

Getting started
or CLEAR in order to set the desired sex.
5
j
C onfirm the entry by pressing the SET
button . The word Time
2
(24-hour format) or
format) will light up. Press the buttons
MODE or CLEAR
3
time format.
Note: The PM symbol
format stands for afternoon/evening.
j
C onfirm the entry by pressing the SET
button . The word time
2
and the hour of the multifunction display
will flash. Press the buttons MODE
CLEAR in order to set the desired time.
5
j
C onfirm the entry by pressing the SET
button . The minutes in the multifunction
2
display will flash. Press the buttons
22
MODE or CLEAR
3
desired time.
j
C onfirm the entry by pressing the SET
button . The word ALM
2
and the hour of the multifunction display
will flash. Press the buttons MODE
CLEAR in order to set the desired
5
alarm time.
j
C onfirm the entry by pressing the SET
button . The minutes of the multifunction
2
display will flash. Press the button
22
MODE in order to set the desired
3
alarm time.
j
C onfirm the entry by pressing the SET
. The device is now in hold
button
2
mode again.
IMPOrTaNT! The CLEAR button
has a different function after setting the
alarm. Press the CLEAR button
activate the alarm. The alarm symbol
will appear in the LC display. Press the
CLEAR button
5
alarm. The alarm symbol
(see also "Alarm function").
10 GB
as well as
25
(12-hour
to set the desired
5
in the 12-hour
27
will appear
25
22
or
3
in order to set the
5
will light up
24
22
or
3
5
to
5
26
again to deactivate the
will go out
26

Setting the day of the week

Q
j
S witch the device to hold mode (see
"Hold mode / Count mode").
j
P ress the FUNC button
on the function bar
j
P ress the SET button
the day of the week starts to flash.
j
P ress the buttons MODE
to set the required day of the week. The
different numbers have the following
meanings:
Monday = 1
Tuesday = 2
Wednesday = 3
Thursday = 4
Friday = 5
Saturday = 6
Sunday = 7
j
P ress the SET button
entry.
j
P ress the FUNC button
return to hold mode.

Using the pedometer

Q
For this function, the device must be in count
mode (see "Hold mode / Count mode").
j
A ttach the pedometer tightly onto your
belt using the belt clip
IMPOrTaNT! The pedometer must be
secured properly and safely. This is the
only way to ensure accurate measurement.
The pedometer now registers the jolts of the
body and records the number of steps taken,
the distance covered, the time required and
calculates the current speed, the maximum
speed and the average speed as well as the
calories consumed, the body fat burnt and
. DAY appears
6
.
14
. The number for
2
or CLEAR
3 5
to confirm your
2
3 times to
6
(see Fig. D).
9