Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Fitting Kit
K112W
Fitment
Place crossbar on vehicle. Minimum
recommended spacing between the bars is
700mm (27 1/2") (unless otherwise stated).
Clamps directly to edge of roof under the
doors
Please check the rear of this manual for
information relating specifically to your
vehicle.
Press adjusting screw to adjust the leg
positions on the crossbar.
Tighten adjusting screw to 5 Nm (3.7 ft lb).
7
Werbung
Inhaltsverzeichnis
