Setup > Users; Setup > Options; Service Provider - Linksys WVC54GCA Bedienungsanleitung

Chapter4
To upgrade the firmware:
1 . Go to the Linksys website, www.linksys.com/
international, and download the firmware upgrade
file for the Camera . Then extract the file .
From the Setup > Administration screen, click Upgrade
2 .
Firmware .
You will see the Upgrade Firmware screen . Click Browse
3 .
to find the extracted file, and then double-click it .
4 . Click Start Upgrade, and follow the on-screen
instructions . To cancel the upgrade, click Cancel .
Setup > Users
The Setup > Users screen lets you designate access rights
for the Camera's users .
Setup > Users Screen
Users Settings
Use this to assign access rights to the Camera's users .
Allow access by
Select how access is to be granted, either
All users or Only users in database . If you select Only
users in database, edit the user database as needed, as
described below .
Users
This lists the user database (the users who have
access to the Camera) .
Editing the Database
To add a user to the database:
1 . Enter the user's name in the User Name field .
2 . Enter the password in the Password and Confirm
Password fields .
3 . Click Add User to save the user in the database .
To edit a user's record in the database:
1 . Select the user from the Users list, then click Edit .
2 . Edit the User Name and/or Password as needed .
3 . Click Add User to save the updated information .
Wireless-G Internet Home Monitoring Camera
Advanced Configuration with the Web-based Utility
Other operations:
Clear
•
clear the User Name, Password, and Confirm Password
fields and start over .
Delete
•
select the user from the list, then click Delete .
Delete All
•
click OK to confirm .
To save your changes, click Apply . To cancel any unsaved
changes, click Cancel . To get additional information about
the screen's features, click Help .
Setup > Options
The Setup > Options screen allows you to set up and
configure DDNS Service, UPnP configuration, and
Alternate Port settings . DDNS (Dynamic Domain Name
System) lets you assign a fixed host and domain name to a
dynamic Internet IP address .
DDNS
Enable DDNS
with the Camera .

Service Provider

which is preset to TZO .
Domain Name
by your DDNS service provider .
E-Mail Address
the DDNS service .
TZO Key
service provider .
Update Period
whether the Internet IP address has been changed . Specify
how often to check, from Every 10 mins to Every  hrs,
as well as the time to start checking, in hh:mm format .
While editing a user's information, click Clear to
To delete a user's record from the database,
To clear the database, click Delete All, then
Setup > Options Screen
Select this option to enable DDNS service
This is the DDNS service provider,
Enter the domain name assigned to you
Enter the E-mail address used to register
Enter the TZO key provided by your DDNS
Use this to set the schedule for checking