Disposal And Reycling - Elinchrom ELB 500 TTL UNIT Gebrauchsanleitung

TRANSPORTATION
Use only the original cartons or cases when you travel or ship flash
units to avoid transportation damages. Try to avoid condensation
related problems, acclimatise flash units before using them.
Ideally discharge flash units before transporting them and wait 30
minutes after the mains cable has been removed so the unit has
cooled down. Never drop a flash unit; the flashtube and internal
components could break.
Please refer to our separate TRAVELLING BY AIR AS A
PASSENGER Instructions (73042) for current transportation
regulations.
DISPOSAL AND RECYCLING
This device has been manufactured to the highest standards from
materials which can be recycled or disposed of in a manner that is
not environmentally damaging. The device may be taken back after
use to be recycled, provided that it is returned in a condition that is
the result of normal use.
Any components not reclaimable will be disposed of in an
environmentally acceptable manner. Used Batteries may need to
be recycled. Check your local regulations!
If you have any question on disposal, please contact your local
office or your local ELINCHROM distributor (please visit our website
for a list of all ELINCHROM distributors worldwide).
EN
33