Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
User Manual for
Mobile devices HOLDER
Read the user manual completely and carefully. It is part of the product and
includes important information for proper installation and use. Keep this
user manual for clarification and only pass it on together with the product.
Safety Instructions
Risk of injury
•
Do not modify product, product parts or accessories.
•
Avoid extreme conditions, such as extreme heat and coldness, wet-
ness and direct sun light, as well as micro waves, vibrations and
mechanical pressure.
•
Select the installation place so that neither operation nor the
driver's view is impaired while driving.
•
Do not mount the suction cups to the side windows.
•
Installing and setting only at standstill and secured car.
•
Only use in dry ambience.
•
Do not short-circuit ports and circuits.
Material damage by improper use
•
Compare the specifications of product, power supply and periphe
rals. These must be identical.
•
Regularly check the tightness of the product.
Extreme heat, cold and humidity can change the elasticity of the suction mount.
•
Only use in the temperature range of 0 ~ +40 °C.
•
The installation place must be dry and free of grease and dust.
•
Do not use equipment heavier than 250 g.
•
Use product, product parts and accessories only in perfect condition.
Description, Function and Intended Use
•
magnetic holder is suitable for almost every type of smartphone
and phablet
•
elegant, slim design with a chic metal ring
•
Quick-snap mounting technology ensures fast and simple use
•
smart and virtually invisible attachment to the air outlet in a car
(option)
•
also works perfectly as a table stand for smartphones
•
back cover is not included in the delivery
38685
1 Magnet holder
2 Metal ring (glue mounting)
3 Back Cover metal inlay
Specifications
Article
Dimensions
31 x Ø35 mm
Weight
Intended use
We do not permit using the device in other ways like described in
chapter "Description and Function" and „Safety Instructions".
Not attending to these regulations and safety instructions might cause fatal
accidents, injuries, and damages to persons and property.
Mounting
Preparing
1.
Select the installation place so that neither operation nor the
driver's view is impaired while driving.
2. a)
When using a back cover, place the back cover metal inlay between
the smartphone and the back cover.
Be careful not to scratch the surface of your smartphone.
It may be necessary to place a piece of paper or similar between the back of the
smartphone and the backcover metal insert. be inserted.
REV2016-01-08
V3.0
47145
1
2
3
38685
47145
34 x Ø45 mm
34 g
2. b)
Alternatively, clip the metal ring by removing the adhesive film cover
on the back of your back cover or smartphone.
When removed, adhesive residue may remain on the smartphone or backcover.
Operation
Air vent mounting by Quick Snap
Quick Snap holder can be mounted vertically and hori-
zontally.
3.
4.
Use
Setting
Quick snap holders can only be rotated when mounted.
Maintenance, Care, Storage and Transport
•
Let a professional do maintenance and repair work.
•
Only use a dry and soft cloth for cleaning.
•
Do not use detergents and chemicals.
•
Store cool and dry.
•
Regularly check the tightness of the product.
Liability Notice
We reserve the right to printing errors and changes to product,
packaging or product documentation.
•
See our terms of warranty. These are available in their current form
under the given contact details.
Disposal Instrustions
The product can be disposed with household waste.
- 2 -
1.
Adjust the air vent slot on maxi-
mum flow.
2.
Plug the locking lugs of the air
vent holder into the air vent.
Remove the protective film from the steel
adapter plate.
Glue the steel adapter plate to the inside of
your smartphone case or to the back of your
smartphone.
Goobay
by Wentronic GmbH
®
Pillmannstraße 12
38112 Braunschweig
Germany
Werbung
