5.
Adjust the paper-length and paper-width guides to
the size of the paper being used. Check the paper
to verify the guides lightly touch the stack, but do
not bend it.
NOTE:
Do not adjust the paper guides tightly
against the paper stack. Adjust them to the
indentations or markings in the tray.
NOTE:
To prevent jams, adjust the paper guides
to the correct size and do not overfill the tray. Be
sure that the top of the stack is below the tray full
indicator.
6.
Close the tray.
7.
The tray configuration message displays on the
printer control panel.
8.
Select
OK
to accept the detected type and size, or
select
Modify
to choose a different paper size or
type.
For custom-size paper, specify the X and Y
dimensions for the paper when the prompt
displays on the printer control panel.
ENWW
Load paper
29